Type S

Bedding technique

The S bedder is a heavy duty bedder for distributing sand but can also distribute sawdust, compressed straw and dry compost. The bedder has a wheel at the bottom of the bucket to prevent clogging.
Between the bearings and the hydraulic motor are spacers so sand will not get into the bearings.
The machine is standardly equipped with a heavy duty three-layer conveyor, an extra heavy duty frame and sheet metal to guarantee a long service life.

Type 

 

LxWxH (mm)

 

Content (L)

 

Empty weight (kg)
 

Maximum loading weight (kg)

Minimal required oil capacity
 

Maximum oil capacity
 

S 750

1100x1500x1190

750

400

1200

30 l/min
175 bar

60 l/min
225 bar

S 1000

1160x1700x1235

1000

445

1600

35 l/min
175 bar

60 l/min
225 bar

S 1300

1160x2100x1245

1300

565

2150

50 l/min
175 bar

75 l/min
225 bar

Specifications:

  • Heavy duty frame and sheet metal
  • Hardox blade and wear strip
  • Discharges to the left and to the right
  • One double acting hydraulic function required
  • Hydraulic motors with flexible couplings and relief valve
  • Manually adjustable metering valves
  • Big metering roll at the bottom of the bucket
  • Heavy duty three-layer conveyor with double sealed edges and scraper
  • Rubber covered drive- and second roller
  • 2-layer powder coating

Options:

  • Metering shutter
    (for precise distribution of very small quantities, not suited for sand)
  • Foldable sweeping brush on the left or on the right side
  • Manure scraper below the bedder
  • Flow and pressure limiter (required when driving machine exceeds the hydraulic pressure and flow)