Silage shear grab type KHMⅡ
Feeding technique
The KHMⅡ is suitable for wheel loaders, telehandlers and tractor mounted front loaders with a machine
weight of 5 to 10 tonnes. The grab height has increased with the introduction of the new series Ⅱ, which has increased the volume. Furthermore, the shear grabs are provided with knives with a finer toothing, so that less force is needed to
cut. Due to the toughtful construction, the weight is limited. The silage shear grab can be implemented with a
closed bucket or with tines. The addition T to the type number stands for tine base.
|
Type |
LxWxH (mm) |
Grab width |
Content (m3) |
Weight empty |
Minimal required |
Maximum oil |
|
KHMⅡ 1800 |
1280x1900x1260 |
1825 |
1.4 |
965 |
25 l/min |
100 l/min |
|
KHMⅡ 1800 T |
1280x1900x1260 |
1825 |
1.4 |
1010 |
25 l/min |
100 l/min |
|
KHMⅡ 2000 |
1280x2100x1260 |
2025 |
1.55 |
1021 |
25 l/min |
100 l/min |
|
KHMⅡ 2000 T |
1280x2100x1260 |
2025 |
1.55 |
1054 |
25 l/min |
100 l/min |
|
KHMⅡ 2200 |
1280x2300x1260 |
2225 |
1.7 |
1093 |
25 l/min |
100 l/min |
|
KHMⅡ 2200 T |
1280x2300x1260 |
2225 |
1.7 |
1123 |
25 l/min |
100 l/min |
|
KHMⅡ 2400 |
1280x2500x1260 |
2425 |
1.85 |
1140 |
25 l/min |
100 l/min |
|
KHMⅡ 2400 T |
1280x2500x1260 |
2425 |
1.85 |
1186 |
25 l/min |
100 l/min |
Specifications:
- Grab height 1000 mm
- Grab depth 750 mm
- All pivot points fitted with greasable and replacable ball joints
- Replacable corner tips
- Replacable front knives
- Hardox 500 wear parts and blade
- Diameter tines KHMⅡ T Ø50 mm
- 2-layer powder coating
Options:
- Piloted return valve (necessary for machines with an open-center hydraulic function)
- Pressure limiter valve (required when driving machine exceeds the hydraulic pressure)
- Hydraulic pusher for tined bucket (grab depth will increase 125 mm)
- Insert plate for tined bucket (can only be used in combination with a hydraulic pusher)
- Lift mast 1800 mm
One additional single acting hydraulic function required