Silage shear grab type KHSⅡ
Feeding technique
The Flingk KHS is the smalles model in the series of silage shear grabs. It is a lightweight shear grab for the smaller segment of wheel loaders, telehandlers and front loaders up to 7 tonnes.
The grab height has increased with the introduction of the new series Ⅱ, which has increased the content. Furthermore, the shear grabs are provided with knives with a finer toothing, so that much less force is needed to cut.
The small grab height and grab depth make the shear grab very suitable for tractor mounted front loaders. The silage shear grab can be implemented with a closed bucket or with tines.
Type |
LxWxH (mm) |
Grab width |
Content (m3) |
Weight empty |
Minimal required oil capacity |
Maximum oil capacity |
KHSⅡ 1600 |
1165x1700x1060 |
1625 |
0.9 |
745 |
20 l/min |
100 l/min |
KHSⅡ 1800 |
1165x1900x1060 |
1825 |
1.0 |
790 |
20 l/min |
100 l/min |
KHSⅡ 2000 |
1165x2100x1060 |
2025 |
1.1 |
830 |
20 l/min |
100 l/min |
KHSⅡ 2200 |
1165x2300x1060 |
2225 |
1.2 |
880 |
20 l/min |
100 l/min |
Specifications:
- Grab height 850 mm
- Grab depth 650 mm
- All pivot points fitted with greasable and replacable ball joints
- Replacable corner tips
- Replacable front knives
- Hardox 500 wear parts and blade
- 2-layer powder coating
Options:
- Tines instead of closed bucket
- Piloted return valve (necessary for machines with an open-center hydraulic function)
- Insert plate for tined bucket
- Hydraulic pusher for tined bucked
- Lift mast 1800 mm