Silage shear grab type KHSⅡ/KHPⅡ
Feeding technique
The Flingk KHSⅡ and KHPⅡ are the smallest models in the series of silage shear grabs. These are lightweight shear grabs for the smaller segment of wheel loaders, telehandlers and front loaders up to 7 tonnes. The grab height has increased with the introduction of the new series Ⅱ, which has increased the volume. Furthermore, the shear grabs are provided with knives with a finer toothing, so that less force is needed to cut.
The small grab height and grab depth make the shear grab very suitable for tractor mounted front loaders. The silage shear grab can be implemented with a closed bucket or with tines. The addition T to the type number stands for tine base.
|
Type |
LxWxH (mm) |
Grab width |
Content (m3) |
Weight empty |
Minimal required oil capacity |
Maximum oil capacity |
|
KHSⅡ 1600 |
1170x1700x1060 |
1625 |
0.9 |
688 |
20 l/min |
100 l/min |
|
KHSⅡ 1800 |
1170x1900x1060 |
1825 |
1.0 |
725 |
20 l/min |
100 l/min |
|
KHSⅡ 2000 |
1170x2100x1060 |
2025 |
1.1 |
769 |
20 l/min |
100 l/min |
|
KHSⅡ 2200 |
1170x2300x1060 |
2225 |
1.2 |
821 |
20 l/min |
100 l/min |
|
Type |
LxWxH (mm) |
Grab width |
Content (m3) |
Weight empty |
Minimal required oil capacity |
Maximum oil capacity |
|
KHPⅡ 1800T |
1270x1900x1090 |
1825 |
1.3 |
877 |
20 l/min |
100 l/min |
|
KHPⅡ 2000T |
1270x2100x1090 |
2025 |
1.45 |
916 |
20 l/min |
100 l/min |
|
KHPⅡ 2200T |
1270x2300x1090 |
2225 |
1.6 |
977 |
20 l/min |
100 l/min |
Specifications:
- Technical specifications KHSⅡ
• Grab height 850 mm
• Grab depth 650 mm
• All pivot points fitted with greasable and replacable ball joints
• Replacable corner tips
• Replacable front knives
• Hardox 500 wear parts and blade
• 2-layer powder coating - Technical specifications KHPⅡ
• Grab height 900 mm
• Grab depth 800 mm
• All pivot points fitted with greasable and replacable ball joints
• Replacable corner tips
• Replacable front knives
• Hardox 500 wear parts
• Diameter tines KHPⅡ T Ø50 mm
• 2-layer powder coating
Options:
- Piloted return valve (necessary for machines with an open-center hydraulic function)
- Pressure limiter valve (required when driving machine exceeds the hydraulic pressure)
- Hydraulic pusher for tined bucket (grab depth will increase 125 mm)
- Insert plate for tined bucket (can only be used in combination with a hydraulic pusher)
- Lift mast 1800 mm
One additional single acting hydraulic function required