Silage shear grab type KHXL
Feeding technique
The Flingk KHXL is a unique silage shear grab. Due to the large grab height and small grab depth, more often the front wall of the silage pit gets refreshed, making the silage less susceptible for decay. Another advantage is that the shear grab doesn’t have to be pushed far into the silage. Due to the short lower blade, the shear grab unloads easily, for example into the mixer wagon, and does not need to be tipped far to empty it. It will more gradually release the silage into the mixer wagon.
Because of the fact that the cylinders are mounted inside the bucket, it is possible to grab at the side of the silage pit, which will reduce the amount of feed residues.
The special knives cut smoothly through your pit, resulting in a tight cut. This also causes less strain on the shear grab and on your front loader, shovel or telehandler.
|
Series |
Machine weight |
Grab height |
Grab depth |
Minimal required |
Maximum |
|
KHXL 14** |
4 - 9 |
1400 |
350 |
20 l/min |
80 l/min |
|
KHXL 17** |
5,5 - 11 |
1700 |
350 |
25 l/min |
100 l/min |
|
KHXL 22** |
7 - 16 |
2200 |
350 |
30 l/min |
120 l/min |
|
Type |
Grab height x grab width (mm) |
LxWxH (mm) |
Content (m3) |
Weight empty (kg) |
|
KHXL 1418 |
1400x1800 |
1360x1935x1250 |
0.9 |
978 |
|
KHXL 1420 |
1400x2000 |
1360x2135x1250 |
1.0 |
1031 |
|
KHXL 1422 |
1400x2200 |
1360x2335x1250 |
1.1 |
1092 |
|
KHXL 1718 |
1700x1800 |
1695x1935x1470 |
1.05 |
1147 |
|
KHXL 1720 |
1700x2000 |
1695x2135x1470 |
1.2 |
1242 |
|
KHXL 1722 |
1700x2200 |
1695x2335x1470 |
1.35 |
1316 |
|
KHXL 1724 |
1700x2400 |
1695x2535x1470 |
1.5 |
1390 |
|
KHXL 1726 |
1700x2600 |
1695x2735x1470 |
1.6 |
1460 |
|
KHXL 2220 |
2200x2000 |
2035x2135x1715 |
1.65 |
1585 |
|
KHXL 2222 |
2200x2200 |
2035x2335x1715 |
1.85 |
1660 |
|
KHXL 2224 |
2200x2400 |
2035x2535x1715 |
2.0 |
1735 |
|
KHXL 2226 |
2200x2600 |
2035x2735x1715 |
2.2 |
1810 |
Specifications:
- Large grab height, small grap depth
- Mainly made of high strength steel S700MC
- Replacable front and side knives
- Hardox 500 wear parts and blade
- 2-layer powder coating
Options:
- Piloted return valve (necessary for machines with an open-center hydraulic function)