Silage shear grab type KHVⅡ
Feeding technique
The solid and robust KHVⅡ is suitable for the heaviest segment of shovels and telehandlers from 9 to 20 tons. The grab height has increased with the introduction of the new series Ⅱ, which has increased the volume. Furthermore, the shear grabs are provided with knives with a finer toothing, so that less force is needed to cut. Due to the toughtful construction, long lifespan is guaranteed. All pivot points are privided with 50 and 60 mm pins. The silage shear grab can be implemented with a closed bucket or with tines. The addition T to the type number stands for tine base.
|
Type |
LxWxH (mm) |
Grab width |
Content |
Weight empty |
Minimal required |
Maximum oil capacity |
|
KHVⅡ 2000 |
1910x2130x1770 |
2030 |
3.3 |
1825 |
35 l/min |
120 l/min |
|
KHVⅡ 2000 T |
1910x2130x1770 |
2030 |
3.3 |
1850 |
35 l/min |
120 l/min |
|
KHVⅡ 2200 |
1910x2330x1770 |
2230 |
3.65 |
1995 |
35 l/min |
120 l/min |
|
KHVⅡ 2200 T |
1910x2330x1770 |
2230 |
3.65 |
2020 |
35 l/min |
120 l/min |
|
KHVⅡ 2400 |
1910x2530x1770 |
2430 |
4.0 |
2065 |
35 l/min |
120 l/min |
|
KHVⅡ 2400 T |
1910x2530x1770 |
2430 |
4.0 |
2090 |
35 l/min |
120 l/min |
|
KHVⅡ 2600 |
1910x2730x1770 |
2630 |
4.35 |
2140 |
35 l/min |
120 l/min |
|
KHVⅡ 2600 T |
1910x2730x1770 |
2630 |
4.35 |
2164 |
35 l/min |
120 l/min |
Specifications:
- Grab height 1500 mm
- Grab depth 1100 mm
- All pivot points fitted with greasable and replacable ball joints
- Replacable corner tips
- Replacable front knives
- Hardox 500 wear parts and blade
- Diameter tines KHVⅡ T Ø55 mm
- 2-layer powder coating
Options:
- Piloted return valve (necessary for machines with an open-center hydraulic function)
- Pressure limiter valve (required when driving machine exceeds the hydraulic pressure)
- Hydraulic pusher for tined bucket (grab depth will increase 125 mm)
- Insert plate for tined bucket (can only be used in combination with a hydraulic pusher)
- Lift mast 1800 mm
One additional single acting hydraulic function require