Beet cutter type BSO
Feeding technique
In order to increase milk production, a good option is to add feed beets to the ration. Feed beets stimulate the dry matter absorption from silage and the sugars from the beets provide a lot of energy and ensure a good rumen fermentation.
To make the absorption by the livestock more efficient and palatable, the beets must be cleaned and cut. To make the intake by cattle more efficient and tastier, the beets need to be chopped. With the BSO you can cut the beet very fine with a high capacity. With the long cutting roller at the bottom of the box, it unloads over the entire width of the box. This allows you to unload directly into a mixer wagon, or to distribute the roughage during silage. By adjusting the counter plate closer or further from the roller, the coarseness of the chips can be adjusted. With the hydraulic stone protection option, the bucket is protected against stones getting stuck; these are thrown out of the bottom of the bucket during the chopping process. The machine is operated with 1 double-acting hydraulic function and is suitable for the 3-point tractor, front loader and shovel attachment.
The hardox cutting blades ensure the preservation of structure and fine chippings. The knives have been sharpened on two sides so that you can reverse the knives in the event of wear.
The cutting roll is over the full width of the machine, so that a high capacity can be achieved.
A hydraulic stone protection system is available as an option. When a stone comes in front of the cutting blade, the valve opens and the stone falls out.
Type |
LxWxH (mm) |
Bucket width (mm) |
Width cutting roller (mm) |
Content (L) |
Empty weight (kg) |
Minimal required oil capacity |
Maximum oil capacity |
BSO 750 |
1210x1490x1255 |
1490 |
1150 |
750 |
410 |
30 l/min |
75 l/min |
BSO 1500 |
1345x2045x1465 |
2045 |
1705 |
1500 |
645 |
30 l/min |
75 l/min |
BSO 2500 |
1470x2600x1595 |
2600 |
2260 |
2500 |
1085 |
50 l/min |
90 l/min |
BSO 4000 |
1680x2825x1865 |
2825 |
2485 |
4000 |
1510 |
50 l/min |
90 l/min |
Specifications:
- One double-acting hydraulic function required
- Unloading over the full width of the machine
- Cutting roller with hardox cutting blades (sharpened on two sides so reversible when worn)
- Adjustable cutting size
- Hardox blade and wear strips
- 2-layer powder coating
Options:
- Hydraulic stone safety device with accumulator, if a stone comes in front of the cutting blade, a valve opens so that the stone falls out of the machine.
- Flow and pressure limiter (required when driving machine exceeds the hydraulic pressure and flow)